Author Topic: Knex Parallel Arm Lift  (Read 1218 times)

Offline Sorunome

  • Administrator
  • Sr. Member
  • ***
  • Posts: 361
  • Karma: +6/-0
  • Keep calm and fox on
    • View Profile
    • My Homepage
Knex Parallel Arm Lift
« on: November 29, 2016, 05:45:27 pm »
Knex Parallel Arm Lift
--> View Instruction


This instruction is only imported from instructables, nothing new.

Here is my newest lift: the Parallel arm lift!
Most credits go to Shadowman, as he invented this lift first in his unfinished ball machine, I tried to rebuild it from the vid (only managed to rebuild the front part of the arm and some basic ideas).
So, this instruction is very complicated and nothing for absolutely beginners.
And it is also loooooooooong.
Be sure that all 3D connectors are turned correctly, with some you also have to pay attention that they aren't turned 180°, I'll note which in the image notes, so be sure to read them!
Sorry for any fails I made, making instructions was quite complicated.
And feel free to ask if you have any problems!
I use a plug-in motor, and I would recommend also using one as they have more power than the battery motors. Maybe you could use two battery motors...
Be sure to comment, rate and subscribe!
Oh, and the first one to make a piece count will earn a patch (But please be honest about it)
Be sure to check out my website!

This is a signature.

Offline Mister Gears

  • Jr. Member
  • *
  • Posts: 56
  • Karma: +0/-0
  • I love mechanical build !
    • View Profile
Re: Knex Parallel Arm Lift
« Reply #1 on: February 10, 2018, 08:24:30 pm »
hey ! It's the first  big K'nex ball machine lift I has build, it was about 6 years ago ^^